*Disclaimer – I received the Speed-Sew product free of charge, however the thoughts and opinions shared are 100% authentic.

Supplies:

• 7/8″ grosgrain ribbon – 2 patterns
• (optional) 1″ webbing
• 7/8″ key fob hardware (found on Etsy)
• Mouse shaped split rings (also Etsy)
• Speed Sew or other fabric adhesive
• pliers fitted with cushioning
• small paint brush or Q-tip & paper plate for glue

1) Cut your ribbon to size. I think 10.5-11″ for an adult size key fob. You’ll need 2 ribbons or 1 ribbon and 1 piece of webbing per key fob.

2) Squirt some Speed-Sew onto a paper plate and use an applicator brush/paint brush/Q-tip to spread some on the back side of one piece of ribbon/webbing. I like to do about 2-3 inches of glue at a time taking time to carefully match up my ribbon edges as I go to get a nice looking, straight final product.

3) Get your key fob hardware ready.

4) Use you plier to clamp down on the hardware. Be careful not press down too hard so the clamp prongs don’t puncture the front of the hardware.  

5) Twist your split ring onto the key fob.

That is all there is to it! I made all 4 of these key fobs in about 30 minutes including drying time.

So that I can easily carry my Key to the World card around the ship with me I will be buying a lanyard badge holder to add to the split ring on the key fob. Now I’ll be free to roam the ship purse and pocket free without a care in the world! Have you been on a Disney Cruise or planning on going some day? I plan to have a couple more tutorials and posts soon!

The post Disney Cruise Line Inspired Key Fob appeared first on Shes {kinda} Crafty.

Supplies:

Champagne flutes (4 pack at Target for $9.99)
Gold Vinyl
Silhouette CAMEO or Portrait
Circle Confetti (Design ID #45405)
Cheers (Design ID #24001)
Weeding hook
Transfer paper or contact paper
Scissors

Directions:

Related articles

• 5 Champagne Cocktails for New Year’s Eve

The post DIY Gold Confetti Champagne Flutes appeared first on Shes {kinda} Crafty.

The supplies you need are very simple and very easy to customize – the shapes and the colors are all interchangeable, just pick what you want!

Supplies:
Glass Ornaments
Fine Glitter
Satin Angel wings
Coordinating 3/8″ Ribbon
Funnel (or a piping tip as I used)
Pledge Floor Care clean & shine or the cheap non-aerosal hair spray works in a pinch, too
Glue gun and glue sticks

Step 1) Remove the ornament tops and swish around a small amount of Pledge or hairspray. Dump any access liquid into your next ornament.

2) Place a funnel, or icing piping tip, into the top of your ornament and pour some glitter in. Start rolling the glitter around to cover all the sides, adding more glitter if needed.

Step 3) Place caps, carefully, back on to the ornaments.

Step 4) Hot glue angel wings to the back of the ornament and tie a coordinating ribbon through the loop for hanging (or use an ornament hook).

It was really THAT simple! Now you have a beautiful ornament to adorn your tree with the memory of loved ones or give ask gifts.

Of course, you could take it one step further and add some personalization – with paint, vinyl, or stickers.

The post DIY Angel Ornaments | Cricut Explore Giveaway appeared first on Shes {kinda} Crafty.

Supplies:

Wide mouth mason jar (I use Ball Canning jars)
Vinyl decal or sticker
Mod Podge
Paint (I used black and white but you can use any two colors)
Glitter
Paint brushes
Painter’s tape
(optional) Acrylic sealer

Place your decal on the mason jar wherever it has the least about of raised lettering. I cut this snowflake out on scrap vinyl with my Silhouette CAMEO but you can use any shape, any color, or any sticker.

Next, apply a light layer of Mod Podge over your decal/sticker – this will ensure that instead paint that might get under the decal/sticker edge it is clear Mod Podge instead. Let dry 15 min or so.

Next, starting right under the rim, make 2 stripes with 1″ wide painter’s tape. Paint the exposed glass with one of your colors.

Let the first coat dry. Paint a 2nd coat of the same color and then before the 2nd coat dries pull off the painter’s tape.

Using a flat edge brush I hand painted the black stripes. I did this for two reasons: 1) I am very impatient and I did not want to wait for the white to completely dry before moving on and 2) Paint doesn’t necessarily want to stick to glass, especially acrylic paint, so I feared that covering up the white with painter’s tape to paint the black would result in the white paint pulling off of the glass. Hand painting 2 stripes is pretty simple, you an totally do it!!

Before the 2nd coat of your 2nd paint dries it’s time to pull up the decal or sticker you used. Using a snowflake might not have been the best way to go, it wasn’t easy pulling up all those points of the snowflake. I think a Christmas Tree or reindeer would have been a little easier. As you can see below I had a little issue in the lower left hand side of the snowflake – but no big deal I just used my painted brush and hand brushed in the parts that peeled away when I was removing the decal.

The only thing left is to brush Mod Podge all inside your jar and shake away with the glitter. Once you’ve got a good coat you an choose to spray acrylic sealer inside the jar, on top of the glitter, to help it from shedding.

To add some extra shimmer to all that glitter drop in an LED tea light, you can pick them up in almost every candle section these days. I would just hold back on placing a real open fame due to all the glitter and sealer.

The post DIY Stripes and Glitter Mason Jar appeared first on Shes {kinda} Crafty.